Diy Garden Project - How To Clean Garden Decking

Installing garden decking boards represents a financialpressure washer as it might damage the wood,
investment which can help increase the value of yourthose used as multi-purpose home jet cleaners will
home. Care and maintenance are essential to keepwork just fine.
the garden decking in prestige condition. There is alsoStep 3a : Use warm water and soda crystals - To
an important safety aspect to keeping your gardenclean the decked surface on a budget and to
decking clean as it will prevent the surface fromminimise wastage, use warm water and soda
becoming a slippery over time.crystals. Spray warm water over the decked surface
Materials: warm water, soda crystals, chemical agentsand sprinkle soda crystals. Leave the decking for a
(optional) few hours and once dry brush using a stiff broom.
Tools You'll Need: stiff household broom, pressureOr
washer (optional)Step 3b : Use dedicated cleaners - Soda crystals are
Before You Begin: The cleaning process is likely tofantastic for cleaning garden decking, but they take a
take some time, make sure you have the time andwhile to dry. There are a number of chemical agents
do not rush the job. For better results, clean yourwhich will both clean and rejuvenate the timber. Look
decking in summer when the decks are dry.out for a chemical agent specifically designed for
Step 1 : Clear the decked area - Make sure theyour type of timber which can vary from ipe decking
decking surface is free of any obstacles so you canto teak decking etc and purchase it from a reputable
concentrate on cleaning rather than moving toys,source. Normally those chemicals are highly
chairs and tables around. Do not drag any piece ofconcentrated therefore one to two liters will do.
furniture around therefore you should considerStep 4: Rinse the deck once again - After you have
getting a helping hand for this step.completed the cleaning process, rinse the deck area
Step 2 : Brush thoroughly - Using a stiff broom givecompletely to remove any trace of the cleaning
the deck a thorough brush followed by jet washsolutions and chemical agents. Allow the deck to dry
using a pressure washer if you have one to get ridcompletely before replacing furniture and other items
of dirt and debris. Do not use an industrial gradeon the deck surface.