DIY Garden Shed - Yes You Can

Many people have so many things in their homes thatby the first joist being located about 15.25 " and each
they don't have anywhere to put everything, this isjoist will be about 16" apart at each interval from that
where a shed can come into play. A homeowner canpoint. Then install the 0.75" plywood for the rest of
build their own Garden Shed by purchasing a kit or bythe floor makes sure all of the edges are straight.
designing a shed on their own. In either situation theWalls
extra space is a much needed accessory for anyNow the walls can be put in place. First place studs in
homeowner.the center block and the 15.25" from one end of one
Many homeowners love to build things themselves,of the floor. Then put triple studs on the ends of the
the satisfaction is uncompromised. Here is a brieffloor to put the walls up. Mark out the door and build
description of how to build a do it yourself (DIY)the door header from a 2x6' together with 0.5"
Garden Shed:plywood. Secure the walls with a brace. Then put on
Materials neededthe window headers with a 2x4' and a 0.5" plywood.
You will need nails, plywood, treated lumber, bandRoof
joist, galvanized nails, hammer, goggles, gloves,Mark out the shape of the top point of the roof
helper, braces etc.then center the plywood and install the siding and
Floortrusses. Do this for each side of the roof and attach
A basic design for a DIY Garden Shed is about 9x13'to the top of the structure. Once all of this is done it
and it can be set on concrete or lumber. For thisis time for detailing and putting on protective shingles
description I will use the lumber flooring. Carve outand mats for the roof.
the space in the ground where the four corners ofConclusion
the shed is going to be about 4 inches or so and fillThis type of project can be very daunting but the
these spaces with crushed rock as a base. Take 2x6'best way to put together a DIY Garden Shed is to
treated lumber for the outer edges and place thebuy a kit and follow the instructions to the letter. It is
band joints on top of the lumber and nail together.also a good idea if you have someone that is good
Secure the pieces with 16d galvanized nails.with construction to assist you.
The layout for the inside of the floor will be started