Kids Picnic Table

A kids picnic table is one of those simple things in lifedo have a way of snapping.
that the whole family can enjoy. Children love helpingThen there is the wood. 8 - 1x6 (seats and tabletop)
to build things. And a picnic table is simple enoughand 9 -1x3 (legs, seat supports, table supports and
that even if you never finished a wood workingbrace) should do the trick. Being as we are just
project before, this little craft can be done in underbuilding a kids picnic table, there is no need to go
an hour. Only a hand full of tools are needed, and thisover board (no pun intended) with red cedar or any
varies only slightly depending on how muchthing fancy like that. It is recommended that you do
involvement an adult wants to have in the proses:not use pressed, treated wood though because of
A wooden stool or saw horses:the chemicals and health factors. Pine is a typical
A square set for making 90 degree markingswood used for this project. Untreated wood can be
An adjustable or open end wrenchused if the table is to be used indoors. If the table is
Measuring tape:intended to be left outside, choose a wood type
Pencilthat has a natural resistance to decay in preference
Hammerto a pressure-treated wood. The local lumber store
Drill and drill bits.will be able to assist in this. Either way, if it you wish
Screw driver (wood screws - 20 or so)the have it last longer then a year, you should treat
12 x Carriage bolts (¾" wide by 2" long w/it with some kind of sealer to avoid water damage,
nuts and bolts)warping and splinters.
If the kids picnic table is meant to be a kids onlyWhen all is said and done, your new kids picnic table
project, a hand drill and hand saw can be used underwill be cause your children to light up at there own
adult supervision. Otherwise, pre-drilling and cuttinghandy work and want to use it every night. You can
with power tools can drastically cut down on timeeven truly make it there own by letting them paint it,
and 're-dos'. Either way, square headed screw arecarve on it and draw on it... what can it hurt. It will be
recommended because they do not slip with a screwmuch more then just a place to sit and eat.
driver and goggles should be worn because drill bits